Double/three-layer co-extruded cast film machine
Date：2019/3/20 11:24:55 / Read： / Source：本站
Double/three-layer co-extruded cast film
The production line uses LDPE/LLDPE/MPE as the main raw
material, and uses several different grades of resin to extrude through the
extruder to produce a self-adhesive single-sided or double-sided adhesive
double or triple stretch stretch film.
Production line characteristics
1. Compact structure, high cost performance; double or
triple layer co-extrusion, automatic roll change system, high quality product
appearance and performance.
2. The production line is mainly composed of extrusion,
casting, traction, lifting, walking, swinging, trimming, changing, online edge
material recycling, electronic control system and other components.
3. High plasticized alloy screw design and crystal point
treatment structure to ensure material plasticization and extrusion stability.
4. The cooling roller adopts double-layer cooling
structure to ensure good cooling effect and uniform roll surface temperature in
5. This production line can be equipped with automatic
thickness gauge with APC system and static eliminator according to customer
6. After setting the temperature, only use the lifting
speed, automatically calculate according to the setting parameters, the speed
changes, the film thickness does not change, and it can also run separately.
7. The winding adopts automatic roll change, the flying
knife servo cuts off, and the edge material online automatic recycling system
has high production efficiency and cost saving.
8. The whole machine adopts PLC control and human-machine
interface touch screen operation, which can set parameters arbitrarily, and has
functions such as automatic calculation, memory, detection and alarm. Support
network remote detection, which provides more comprehensive maintenance for the
9. Electrical control components are all well-known
brands at home and abroad, the production line runs smoothly and reliably, and
better guarantees the quality of equipment.
1. Higher tensile strength, puncture resistance and
2. Good retraction memory and self-adhesiveness, which
can make the goods tightly wrapped into a whole and protect the transported
3. Excellent transparency and extensibility, making the
packaged items beautiful, economical and practical.
Main use of the product：
It is widely used in packaging materials such as building
materials, automobile and motorcycle parts, cylinder film, tube paper, hardware
accessories, and bulk pallets for bulk goods. It is a good substitute for heat
shrinkable packaging film.
Main technical parameters：
Model: XD-LYCR-A100/65-1000; XD-LYCR-A65/110/65-1500;
Finished product width: 1000mm ------2000mm
Finished product thickness: 0.01-0.03 mm
Film structure: A/B; A/B/C
Line speed: 200 m/min;
Maximum extrusion capacity: 240kg/h-----480kg/h
Total power: 200kw-----320kw
100#Double/three-layer co-extruded cast film machine
200#Double/three-layer co-extruded cast film machine
300#Double/three-layer co-extruded cast film machine
400#Double/three-layer co-extruded cast film machine
500#Double/three-layer co-extruded cast film machine
600#Double/three-layer co-extruded cast film machine
700#Double/three-layer co-extruded cast film machine
800#Double/three-layer co-extruded cast film machine