PCTFE film equipment

Date:2019/3/20 11:06:06 / Read: / Source:本站

PCTFE film machine

 Main functions:

Chlorotrifluoroethylene polymer. Abbreviation PCTFE. Structure is melting temperature 213 , excellent chemical stability, insulation and weather resistance, long-term use in -196 ~ 125 , mechanical strength and hardness better than polytetrafluoroethylene, has good  transparency  and low ventilation rates when use PCTFE to produce film. PCTFE is a crystalline polymer, the melting point is 425F, and density is 2.13g/cc (g / cc).

PCTFE is a tri-fluorometry radical polymerization of vinyl chloride with a product of a main repeating CF (cl)-CF element linear backbone.

PCTFE is a crystalline polymer, the melting point is 425F, and density is 2.13g/cc (g / cc).

PCTFE  inert to most active chemicals at room temperature , and can be dissolved in a solvent few in 212T above, some of the solvent may also be swollen, especially for chlorinated solvents . PCTFE has excellent gas barrier ability, the water vapor permeability of the film product is the lowest in all transparent plastic film. The electrical properties are similar with other perfluorinated polymers , but the dielectric constant (2.3-2. 7 and loss factor is a little bit higher , especially at high frequencies. PCTFE can be made thick (1/8 in.) optically transparent parts.

Process and applications:

Although the PCTFE available melting processing, but due to the high melt viscosity, a trend of degradation leads to bad performance of processed products,the processing is difficult.

PCTFE resin can made for extrusion and molding pellets . Film thickness is 0.001-0.010 inches, also can be made for rods and tubes. Polytrifluorochloroethylene (referred to as F3) resin spray method, is corrosion resistant technology for chemical equipments. It consists of polychlorotrifluoroethylene resin, phenol resin, graphite powder mixed as a surface adhesive for polychlorotrifluoroethylene plastic and  metal equipment.Before coating the F3 surface layer, first  spray an adhesive intermediate layer on the metal substrate surface. This method is simple, easy to operate, regardless of equipment shape, size limit, its sprayed equipment with  widely use medium and high strength, can be widely used in petroleum, chemical, pharmaceutical, pesticide and other chemical industries corrosive.

Mainly used for corrosion-resistant parts in chemical equipment, such as linings and coatings for pipes, valves, valve seats, high pressure seal packing, gears, bearings, diaphragms, gaskets, reactors, tanks, fans, centrifuges and others ;and moisture-proof, anti-sticking coating layer for electronic equipment high-frequency insulation, high-frequency cables, coil insulation, etc.;

100#PCTFE film equipment

200#PCTFE film equipment

300#PCTFE film equipment

400#PCTFE film equipment

500#PCTFE film equipment

600#PCTFE film equipment

700#PCTFE film equipment


Phone now 13986280012 OR More contact information →

Go To Top
  • 优信彩票|平台官网 新郑市 | 永春县 | 镇坪县 | 临洮县 | 达日县 | 安岳县 | 江孜县 | 宁城县 | 云南省 | 察哈 | 临沭县 | 井冈山市 | 枣庄市 | 论坛 | 怀远县 | 秭归县 | 石河子市 | 卢氏县 | 临桂县 | 增城市 | 电白县 | 拉萨市 | 湟中县 | 新丰县 | 饶平县 | 茶陵县 | 青川县 | 湘潭市 | 灵璧县 | 定陶县 | 临澧县 | 清远市 |