PCTFE film machine

Date:2019/3/20 11:06:06 / Read: / Source:本站

PCTFE film machine

 Main functions:

Chlorotrifluoroethylene polymer. Abbreviation PCTFE. Structure is melting temperature 213 , excellent chemical stability, insulation and weather resistance, long-term use in -196 ~ 125 , mechanical strength and hardness better than polytetrafluoroethylene, has good  transparency  and low ventilation rates when use PCTFE to produce film. PCTFE is a crystalline polymer, the melting point is 425F, and density is 2.13g/cc (g / cc).

PCTFE is a tri-fluorometry radical polymerization of vinyl chloride with a product of a main repeating CF (cl)-CF element linear backbone.

PCTFE is a crystalline polymer, the melting point is 425F, and density is 2.13g/cc (g / cc).

PCTFE  inert to most active chemicals at room temperature , and can be dissolved in a solvent few in 212T above, some of the solvent may also be swollen, especially for chlorinated solvents . PCTFE has excellent gas barrier ability, the water vapor permeability of the film product is the lowest in all transparent plastic film. The electrical properties are similar with other perfluorinated polymers , but the dielectric constant (2.3-2. 7 and loss factor is a little bit higher , especially at high frequencies. PCTFE can be made thick (1/8 in.) optically transparent parts.

Process and applications:

Although the PCTFE available melting processing, but due to the high melt viscosity, a trend of degradation leads to bad performance of processed products,the processing is difficult.

PCTFE resin can made for extrusion and molding pellets . Film thickness is 0.001-0.010 inches, also can be made for rods and tubes. Polytrifluorochloroethylene (referred to as F3) resin spray method, is corrosion resistant technology for chemical equipments. It consists of polychlorotrifluoroethylene resin, phenol resin, graphite powder mixed as a surface adhesive for polychlorotrifluoroethylene plastic and  metal equipment.Before coating the F3 surface layer, first  spray an adhesive intermediate layer on the metal substrate surface. This method is simple, easy to operate, regardless of equipment shape, size limit, its sprayed equipment with  widely use medium and high strength, can be widely used in petroleum, chemical, pharmaceutical, pesticide and other chemical industries corrosive.

Mainly used for corrosion-resistant parts in chemical equipment, such as linings and coatings for pipes, valves, valve seats, high pressure seal packing, gears, bearings, diaphragms, gaskets, reactors, tanks, fans, centrifuges and others ;and moisture-proof, anti-sticking coating layer for electronic equipment high-frequency insulation, high-frequency cables, coil insulation, etc.;

100#PCTFE film machine

200#PCTFE film machine

300#PCTFE film machine

400#PCTFE film machine

500#PCTFE film machine

600#PCTFE film machine

700#PCTFE film machine


Phone now 13986280012 OR More contact information →

Go To Top
  • 优信彩票|平台官网 夏河县 | 张家港市 | 汤阴县 | 马尔康县 | 龙南县 | 吴桥县 | 万山特区 | 九龙县 | 巴东县 | 惠安县 | 鹤山市 | 禹州市 | 湛江市 | 保山市 | 浙江省 | 搜索 | 腾冲县 | 游戏 | 三原县 | 通化县 | 洪江市 | 措美县 | 柘荣县 | 清水县 | 兴宁市 | 大冶市 | 兰溪市 | 益阳市 | 南开区 | 高邮市 | 修武县 | 凯里市 |