Common equipment failures and elimination methods in the production process line

日期:2019/4/3 10:50:19 / 閱讀: / 來源:本站


Common equipment failures and elimination methods in the production process of hollow board production line

Trouble

Reason

Solve method

Impurities in the product

Filter (Screen changer use)damage

Change filter

Product drop at the exit of the mold

Mold temperature is too high

Cooling at the corresponding place

Product appearance

Mold temperature is too low

Corresponding place heating

Partial suction

a. The mold temperature is too high

b. Excessive suction

c. Air knife air volume is small

Cooling at the corresponding part of the mold

Reduce suction

Increase air volume

Product is not flat

a. Uneven temperature of the mold

b. Uneven flow of the mold

c. Uneven gap in the die

d. Temperature difference between the upper and lower ovens

Adjust the corresponding mold temperature

Adjust the flow block flow

Adjust the die gap

Adjust oven temperature

Product grid size is inconsistent

a. The gas path is impassable

b. The air volume is too small or too large

Clean up the gas path

Adjust air flow

 

作者:admin


Phone now 13986280012 OR More contact information →

Go To Top
  • 优信彩票|平台官网 安溪县 | 醴陵市 | 方正县 | 张家口市 | 渝北区 | 太康县 | 瑞昌市 | 柏乡县 | 莎车县 | 屏东市 | 客服 | 象州县 | 宿松县 | 耒阳市 | 来凤县 | 长兴县 | 六枝特区 | 北海市 | 工布江达县 | 陇川县 | 扬州市 | 丰台区 | 孟津县 | 汉寿县 | 板桥市 | 滨海县 | 莱州市 | 合山市 | 泌阳县 | 新营市 | 禄丰县 | 新乡市 |